View previous topic :: View next topic |
Author |
Message |
capriman86
Joined: 13 Jan 2007 Posts: 402 Location: N. Smithfield, RI
|
Posted: Sat May 31, 2008 12:48 pm Post subject: Got my ASC Wing mounted on the capri |
|
|
Last year I picked up an ASC wing in trade for some capri parts I had.
I wasn't sure if it was the best trade as the wing was VERY VERY rough.
But the parts I traded were a beat up lower air dam and a torn up upper bumper cover which I wasn't going to get crap for selling anyway.
SO after removing 3 layers of paint, bondo, etc etc I got it down to bare rubber/plastic.
I have notched it for the 3rd brake light and will need to get it out in the sun tomorrow to completely settle.
Those with these wings know how flexible they are heated up by the sun.
Those that don't have one, you wouldn't BELIEVE how bendy they are in the sun, and then harden up in the shade....crazy.
I thought I had a pic showing how bad it was before but I can't find it..errr
AND I will get bettter pictures out of the garage, but I just finished last night.
I AM SO HAPPY.... It make the bubble look so much better!!!
The first pic shows it before the wing.
.
|
|
Back to top |
|
|
negusm Site Admin
Joined: 25 Aug 2004 Posts: 5183 Location: Charlotte, NC
|
Posted: Sat May 31, 2008 12:51 pm Post subject: |
|
|
I would have traded you a notched wing for an "unnotched" wing.
Looks very nice tho. How are those wing clips coming along?
-Mike _________________ 1985 ascMcLaren Coupe - Midnight Blue
Under Restoration |
|
Back to top |
|
|
tfs2121
Joined: 29 Aug 2004 Posts: 1823 Location: Commerce, MI
|
Posted: Sat May 31, 2008 1:06 pm Post subject: |
|
|
how does it fit along the glass? my wing has a good inch gap from the glass on one side. it loves to hold onto all kinds of crap.
looks good! _________________ ~Peter
1985 ASC McLaren Coupe |
|
Back to top |
|
|
n20capri
Joined: 30 Aug 2004 Posts: 715 Location: Bensalem PA
|
|
Back to top |
|
|
capriman86
Joined: 13 Jan 2007 Posts: 402 Location: N. Smithfield, RI
|
Posted: Sat May 31, 2008 3:49 pm Post subject: |
|
|
negusm wrote: | I would have traded you a notched wing for an "unnotched" wing.
Looks very nice tho. How are those wing clips coming along?
-Mike |
ya dink
Ya know...I actually made some up....and they don't look too bad.
I have the technique down and MIGHT go ahead and use them.
We will see. You can get the right bends and angle with the jaw on a set
of needle nose pliers. They have that wide to skinny downward slope.
For now a drop of hot melt is going to hold them down secure until then...lol
I don't know if you would have traded Mike this one was a mess. But then again I don't know how bad yours was.
tfs2121 wrote: | how does it fit along the glass? my wing has a good inch gap from the glass on one side. it loves to hold onto all kinds of crap.
looks good! |
I am very surprised, hardly any gap.
There will be no crap to get in there as it doesn't see out of the garage except for shows/cruises.
Thanks guys! |
|
Back to top |
|
|
capriman86
Joined: 13 Jan 2007 Posts: 402 Location: N. Smithfield, RI
|
Posted: Sun Jun 08, 2008 1:47 pm Post subject: |
|
|
Decided to take a few better pics now that the ASC wing is on.
Well Mike, I can bend up these clips pretty damn good now, but I
have been looking at the transition point between the wing and the molding.
I have had MORE people tell me not to use them then use them...that it
its a much cleaner look without them. That it would just put another part and two more visual lines joining them.
I had hot melt glued the ends in place so I could
remove them for the clips, but I think I am going to leave it as be. Its holding VERY well and looks great IMHO.
Click the little of the 3 pics to get the BIG
I think you can click it 2x
|
|
Back to top |
|
|
Sandy
Joined: 26 Aug 2004 Posts: 6205 Location: Northern New Jersey GSP Exit 148
|
Posted: Sun Jun 08, 2008 7:19 pm Post subject: |
|
|
Here's the biggest compliment that I could pay to you.....
"I would buy it from you." ~ (I don't say THAT, often!!)
But - I'd put back the OEM wheels.
She's a beauty, and a text-book case for originality. _________________ Sandy passed away in 2012. He will be forever missed.
1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.
http://public.fotki.com/ascmclaren/ascmclaren_capris/sandys_mclarens/ |
|
Back to top |
|
|
fredzilla
Joined: 03 Mar 2005 Posts: 155 Location: New England
|
Posted: Mon Jun 09, 2008 3:02 am Post subject: |
|
|
Here is a crude clip i made for the wing to molding.
|
|
Back to top |
|
|
negusm Site Admin
Joined: 25 Aug 2004 Posts: 5183 Location: Charlotte, NC
|
Posted: Mon Jun 09, 2008 3:09 am Post subject: |
|
|
Maybe glue a small black "button" near the end of the tip. Make it look like it's rivited in place or somethin
-Mike _________________ 1985 ascMcLaren Coupe - Midnight Blue
Under Restoration |
|
Back to top |
|
|
capriman86
Joined: 13 Jan 2007 Posts: 402 Location: N. Smithfield, RI
|
Posted: Mon Jun 09, 2008 11:18 pm Post subject: |
|
|
Sandy wrote: | Here's the biggest compliment that I could pay to you.....
"I would buy it from you." ~ (I don't say THAT, often!!)
But - I'd put back the OEM wheels.
She's a beauty, and a text-book case for originality. |
WOW Thanks Sandy I really appreciate the compliments!
Honestly, 10 holes make me cringe, I just don't like them at all.
If my car was 100% original and 100% stock, I would definitely own a set
to show with "possibly" but thats about it.
At the bottom of this post are the wheels that are going on it, well
that is my plan. I am picking them up Saturday. I think the grey wheel
with the charcoal grey trim should go well together.
negusm wrote: | Maybe glue a small black "button" near the end of the tip. Make it look like it's rivited in place or somethin
-Mike |
Mike you crack me up...LMAO
Fred you did a good quick fab job on that I tell ya...LOL
|
|
Back to top |
|
|
n20capri
Joined: 30 Aug 2004 Posts: 715 Location: Bensalem PA
|
Posted: Tue Jun 10, 2008 12:34 am Post subject: |
|
|
Jeff you need some Merc centers or something factory looking...
_________________ Mike
86 AscMcLaren Capri Coupe - #026 | 11.4@118 | 290/322
86 9L SVO
www.mikemartinelli.com
www.baldguydesigns.net
|
|
Back to top |
|
|
capriman86
Joined: 13 Jan 2007 Posts: 402 Location: N. Smithfield, RI
|
Posted: Tue Jun 10, 2008 2:56 am Post subject: |
|
|
Mike for the TSW's...maybe so
The ARE's are not on my car right now, they went onto my buddies 82GT for a trial run...LOL
If I get the TSW's this weekend he wants my ARE's
We should have done this another night...OMG is it humid
|
|
Back to top |
|
|
|