ascMcLaren Enthusiasts Forum Index ascMcLaren Enthusiasts
An asc McLaren forum for ALL Mustang and Capri based cars modified by Automotive Speciality Corporation, a Division of American Sunroof Corporation.
(a trademarked corporation) with no affilation to this site.
 
 AlbumAlbum   FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Where are the nine now?
Goto page Previous  1, 2, 3
 
Post new topic   Reply to topic    ascMcLaren Enthusiasts Forum Index -> ASC Discussions
View previous topic :: View next topic  
Author Message
Argo



Joined: 11 Aug 2016
Posts: 20
Location: UK

PostPosted: Fri Nov 04, 2016 8:15 pm    Post subject: Where are the nine now? Reply with quote

Hi Mike and Kevin. my car does have air con does this make a difference? . Ian.
Back to top
View user's profile Send private message Album
svo413



Joined: 29 Aug 2004
Posts: 677
Location: San Mateo, California

PostPosted: Fri Nov 04, 2016 8:18 pm    Post subject: Core Reply with quote

Yes, use the Motorcraft HC5 Heater Core for AC cars.
_________________
Kevin Gold card MCA Judge for Fox Body
85 ASC Vert #612205
88 ASC Vert #542 20,550 miles
84 SVO 24,000 miles
03 Mach I 7,900 miles
89 LX Vert
14 CA Special
69 Mustang coupe
67 T-bird 47,000 miles
16 F250
Back to top
View user's profile Send private message Send e-mail Album
Argo



Joined: 11 Aug 2016
Posts: 20
Location: UK

PostPosted: Wed Feb 01, 2017 4:39 pm    Post subject: Where are the nine now? Reply with quote

Hi everyone, it's been a while since my last post,I hope you are all well in this new year
I have been getting hold of as many things I can like new door locks,badges door rubbers etc, etc.so that the car will look it's very best when I get the new paint job sorted.

I have been trying to find the McLaren wheel center pieces as there are a couple missing and it would be nice to get a new set for the special day.
Does anyone know where I can get hold of these?
Regards Ian.
Back to top
View user's profile Send private message Album
svo413



Joined: 29 Aug 2004
Posts: 677
Location: San Mateo, California

PostPosted: Wed Feb 01, 2017 4:44 pm    Post subject: Cap Reply with quote

There are two types of center caps for the mesh or lace wheels.
Front loading and rear loading. The wheels are different. The Capri seem to have 1 type and the mustangs have the other. Just finding the center cap is not easy. Some have made stickers to go over the faded old one.
_________________
Kevin Gold card MCA Judge for Fox Body
85 ASC Vert #612205
88 ASC Vert #542 20,550 miles
84 SVO 24,000 miles
03 Mach I 7,900 miles
89 LX Vert
14 CA Special
69 Mustang coupe
67 T-bird 47,000 miles
16 F250
Back to top
View user's profile Send private message Send e-mail Album
Argo



Joined: 11 Aug 2016
Posts: 20
Location: UK

PostPosted: Wed Feb 01, 2017 5:15 pm    Post subject: Where are the nine now? Reply with quote

Hi, thanks for the reply, they are rear loading, maybe I can get some made for me if they are that hard to find, I can copy the one's I have. Thanks.
Regards Ian.
Back to top
View user's profile Send private message Album
svo413



Joined: 29 Aug 2004
Posts: 677
Location: San Mateo, California

PostPosted: Wed Feb 01, 2017 5:46 pm    Post subject: Cap Reply with quote

You can get them new fior $45 each on Henry's web site. Someone here may speak up about having made some stick on labels. I would buy some too.
_________________
Kevin Gold card MCA Judge for Fox Body
85 ASC Vert #612205
88 ASC Vert #542 20,550 miles
84 SVO 24,000 miles
03 Mach I 7,900 miles
89 LX Vert
14 CA Special
69 Mustang coupe
67 T-bird 47,000 miles
16 F250
Back to top
View user's profile Send private message Send e-mail Album
capri50asc



Joined: 26 Dec 2009
Posts: 267
Location: Canton Michigan

PostPosted: Thu Feb 02, 2017 3:15 am    Post subject: Center Caps for your ASC Capri Reply with quote

I had four made at FASTSIGNS here in the USA. I placed them right over the center caps and they are perfect . They are made of a material that will last for years. But you will need to make a small cut in the center , for the inside to the outer part, and make this cut in the dark area. the cut will not show.


Thanks Chris [/img][/url]
Back to top
View user's profile Send private message Send e-mail Album
Argo



Joined: 11 Aug 2016
Posts: 20
Location: UK

PostPosted: Tue Aug 01, 2017 6:48 pm    Post subject: Tonneau pull down motor Reply with quote

Hi all. It's been a while since my last post. I took my car for its annual MOT and the Tonneau pull down motors plastic bracket has broken and the motor fell of. I have made a temporary repair but would like to get a new plastic bracket so that I can rebuild it. I don't need the complete assembly. This is very expensive as the postage and taxes and import duty etc more than double the original price of anything I order to the UK. Can it be modified so that it is not live and I can make a metal bracket? Any help would be appreciated. Thanks Ian.
Back to top
View user's profile Send private message Album
FoxChassis



Joined: 08 Dec 2009
Posts: 153

PostPosted: Sun Aug 27, 2017 3:38 am    Post subject: Reply with quote

1986 #062 (5.0L convertible) did not have factory A/C, but it did have dealer A/C

http://www.ascmclaren.org/phpBB/viewtopic.php?t=2158
Back to top
View user's profile Send private message Visit poster's website Album
svo413



Joined: 29 Aug 2004
Posts: 677
Location: San Mateo, California

PostPosted: Mon Aug 28, 2017 5:51 am    Post subject: Re: Tonneau pull down motor Reply with quote

Argo wrote:
Hi all. It's been a while since my last post. I took my car for its annual MOT and the Tonneau pull down motors plastic bracket has broken and the motor fell of. I have made a temporary repair but would like to get a new plastic bracket so that I can rebuild it. I don't need the complete assembly. This is very expensive as the postage and taxes and import duty etc more than double the original price of anything I order to the UK. Can it be modified so that it is not live and I can make a metal bracket? Any help would be appreciated. Thanks Ian.


You did not post what year. Dorman makes replacement motors and the plastic housing. Not sure of the exact one used on ASC. It's posted here someplace.

found this on eBay and thought you might like it! Check it out now! DORMAN Trunk Lid Pull Down Motor for Chevy Pontiac Buick Cadillac Oldsmobile http://r.ebay.com/AayTYd
_________________
Kevin Gold card MCA Judge for Fox Body
85 ASC Vert #612205
88 ASC Vert #542 20,550 miles
84 SVO 24,000 miles
03 Mach I 7,900 miles
89 LX Vert
14 CA Special
69 Mustang coupe
67 T-bird 47,000 miles
16 F250
Back to top
View user's profile Send private message Send e-mail Album
Argo



Joined: 11 Aug 2016
Posts: 20
Location: UK

PostPosted: Mon Aug 28, 2017 9:57 am    Post subject: DORMAN Trunk Lid Pull Down Motor Reply with quote

Hi. Thanks for that. I found a number on the motor which suggests it's for Cadillac. I ordered one from eBay which is exactly like the one in the link you posted which arrived a couple of days ago and it looks identical other than the motor which is a little smaller.hopefully that's not a problem. Maybe it's just as good as the 1986 one .Thanks again. Regards Ian.
Back to top
View user's profile Send private message Album
Display posts from previous:   
Post new topic   Reply to topic    ascMcLaren Enthusiasts Forum Index -> ASC Discussions All times are GMT
Goto page Previous  1, 2, 3
Page 3 of 3

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group