View previous topic :: View next topic |
Author |
Message |
negusm Site Admin
Joined: 25 Aug 2004 Posts: 5183 Location: Charlotte, NC
|
|
Back to top |
|
|
Sandy
Joined: 26 Aug 2004 Posts: 6205 Location: Northern New Jersey GSP Exit 148
|
Posted: Wed Feb 09, 2005 8:00 pm Post subject: |
|
|
Buyer will be instructed to forward both plexiglass wincdows and weather striping to Mike Negus for installation _________________ Sandy passed away in 2012. He will be forever missed.
1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.
http://public.fotki.com/ascmclaren/ascmclaren_capris/sandys_mclarens/ |
|
Back to top |
|
|
negusm Site Admin
Joined: 25 Aug 2004 Posts: 5183 Location: Charlotte, NC
|
Posted: Wed Feb 09, 2005 8:12 pm Post subject: |
|
|
With the right weatherstripping, its a no brainer. That stuff Hank sent me was a PITA.
Besides, that stuff he has in the auction is probably so old that you woul d need new stuff anyways....and Hank says he has the right stuff now.
BTW, anybody know if they have weatherstripping going up the front vertical edge? I didn't put any there but may do it since the front edge has a bit a a gap.
-Mike _________________ 1985 ascMcLaren Coupe - Midnight Blue
Under Restoration |
|
Back to top |
|
|
Sandy
Joined: 26 Aug 2004 Posts: 6205 Location: Northern New Jersey GSP Exit 148
|
Posted: Wed Feb 09, 2005 10:53 pm Post subject: |
|
|
Mike, as you might recall, I took the vertical aluminum finishing moulding off - just once to try and re-set and/or adjust it. I vividly recall that there was nothing under it. _________________ Sandy passed away in 2012. He will be forever missed.
1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.
http://public.fotki.com/ascmclaren/ascmclaren_capris/sandys_mclarens/ |
|
Back to top |
|
|
negusm Site Admin
Joined: 25 Aug 2004 Posts: 5183 Location: Charlotte, NC
|
Posted: Wed Feb 09, 2005 11:04 pm Post subject: |
|
|
Sandy wrote: | Mike, as you might recall, I took the vertical aluminum finishing moulding off - just once to try and re-set and/or adjust it. I vividly recall that there was nothing under it. |
Yeah your pics of your car didn't have it either. The plexiglass window bows out just a bit and the center touches the edge of that "vertical aluminum finishing moulding". Which towards the edges, at the top and bottom, there is a bit of a gap. It's not noticeable unless you know its there... _________________ 1985 ascMcLaren Coupe - Midnight Blue
Under Restoration |
|
Back to top |
|
|
eric5oh
Joined: 06 Nov 2004 Posts: 213 Location: Saint John, Indiana
|
Posted: Thu Feb 10, 2005 3:44 am Post subject: |
|
|
Mike, on the next set, I'll take the pieces for the sail panels and you can have the quarter windows, deal? _________________ 2018 F150 S'crew
2011 Fusion AWD |
|
Back to top |
|
|
negusm Site Admin
Joined: 25 Aug 2004 Posts: 5183 Location: Charlotte, NC
|
Posted: Thu Feb 10, 2005 4:38 am Post subject: |
|
|
eric5oh wrote: | Mike, on the next set, I'll take the pieces for the sail panels and you can have the quarter windows, deal? |
Heheh. I really only can use one piece (the vertical strip for the driver's side). I have everything else....so I'm not too motivated to pick more up unless its going for really really cheap. That last set Hank was selling almost looked like it might go for $75!...I did put a bid at like $125 but it shot up passed me while I was hitting the button!
-Mike _________________ 1985 ascMcLaren Coupe - Midnight Blue
Under Restoration |
|
Back to top |
|
|
|