View previous topic :: View next topic |
Author |
Message |
Mustang Munkey
Joined: 28 Aug 2016 Posts: 35 Location: Yorktown, VA
|
Posted: Fri Sep 23, 2016 1:36 am Post subject: ASC McLaren Mustang Pull Down Motor Replacement |
|
|
How involved is it to replace the pull down motor in an 89 Mustang. I am picking my car up tomorrow and it needs a new pull down motor. I plan to buy one from Hank on my way to pick up the car. Wondering if this is something I could install in an hour or so before I start my drive home? Any of you have experience with this?
Thank you,
mark |
|
Back to top |
|
|
4-barrel Mike
Joined: 30 Jan 2016 Posts: 159 Location: Portland, OR
|
Posted: Fri Sep 23, 2016 3:26 am Post subject: |
|
|
http://ascmclaren.com/diagrams.htm -> Tonneau cover #1 & #4
Mike _________________ 1985 5.0 SC, white/blue, modded by POs (more mods coming) |
|
Back to top |
|
|
shelbyscarab
Joined: 18 Jul 2006 Posts: 1009 Location: The Buckeye State
|
Posted: Mon Apr 10, 2017 12:46 pm Post subject: |
|
|
I am trying to install the pull down motor for my '88 ASC McLaren. Can someone post a picture using a flash so I can see the finished mounted position?
I must say, when they fabricated the hole for the motor, they didn't cut enough material away to easily mount it in place. Especially with that $#@!#$ bar in the way. I can see it mounts easily in place with three washers/nuts onto the screw studs, then simply plug the wire in, but I can't get it in place....
Frustrated.
_________________ 1988 ASC McLaren #688 |
|
Back to top |
|
|
shelbyscarab
Joined: 18 Jul 2006 Posts: 1009 Location: The Buckeye State
|
Posted: Wed May 03, 2017 5:51 pm Post subject: |
|
|
shelbyscarab wrote: | I am trying to install the pull down motor for my '88 ASC McLaren. Can someone post a picture using a flash so I can see the finished mounted position?
I must say, when they fabricated the hole for the motor, they didn't cut enough material away to easily mount it in place. Especially with that $#@!#$ bar in the way. I can see it mounts easily in place with three washers/nuts onto the screw studs, then simply plug the wire in, but I can't get it in place....
Frustrated.
|
Anyone? bumped for an answer.....
Can anyone with an '87-'90 ASC take a picture of the top motor in place??
thx. _________________ 1988 ASC McLaren #688 |
|
Back to top |
|
|
Mustang Munkey
Joined: 28 Aug 2016 Posts: 35 Location: Yorktown, VA
|
Posted: Sun May 21, 2017 12:22 am Post subject: |
|
|
I am willing to take a picture for you if the 1989 is the same as the 88. Do you know if they are the same, I only have access to my 1989. _________________ 1989 ASC McLaren Triple BLUE #128 |
|
Back to top |
|
|
shelbyscarab
Joined: 18 Jul 2006 Posts: 1009 Location: The Buckeye State
|
Posted: Mon May 22, 2017 12:56 pm Post subject: |
|
|
Mustang Munkey wrote: | I am willing to take a picture for you if the 1989 is the same as the 88. Do you know if they are the same, I only have access to my 1989. |
Yes, the '89 is identical to the '88 as far as the convertible top is concerned.
thank you for responding and posting a picture. _________________ 1988 ASC McLaren #688 |
|
Back to top |
|
|
shelbyscarab
Joined: 18 Jul 2006 Posts: 1009 Location: The Buckeye State
|
Posted: Mon Apr 30, 2018 1:07 am Post subject: |
|
|
Is there anyone with an '87 to '90 ASC Mustang that could post a picture of the pull down motor installed in place?
Please! _________________ 1988 ASC McLaren #688 |
|
Back to top |
|
|
|