Cleaning

Anything and everything to do with ascMcLaren cars can go here.
Post Reply
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Cleaning

Post by negusm »

I did a quick write up last night on the stuff I use to clean my door panels. I seem to get questions about what I do to them.

http://www.ascmclarencoupe.com/Projects/Cleaning/

These are the door panels I got off from ebay for $73 shipped. I'm not sure why they went so low....they were in extremely good shape...not perfect perfect but darn nice and the dew wipes were perfect and they don't have the power window or power locks punched out yet so they can be used for any car.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... MEAFB%3AIT

I thought they were worth $36.50 each.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
svt1996cobra
Posts: 350
Joined: Sat Feb 26, 2005 10:08 pm
Location: Kalamazoo, Michigan
Contact:

Cleaning!

Post by svt1996cobra »

Good information Mike! Thanks
David passed Thanksgiving 2015. He will be deeply missed.
User avatar
mustang marty
Posts: 252
Joined: Sat Aug 28, 2004 11:13 pm
Location: Seattle
Contact:

Post by mustang marty »

Good write up Mike....

I just received my eBay panels on thursday. Took nearly 2 months to get here between the sellers and my own traveling schedules, but well worth the wait:

http://cgi.ebay.com/ebaymotors/ws/eBayI ... AMEWN%3AIT

They cost me a bit more with shipping, but good blue panels are getting hard to find. Since most people want gray or black, the blue stuff gets tossed. Anyway, these were pretty clean right out of the box. I spent a couple of hours cleaning with the MrClean pads (they rock!) and STP Son of a Gun. They now look too good to cut up for the ASC armrests!



Image
Image
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

I'm not sure about STP but I think its basically the same stuff as amorall and armorall destroys vinyl and plastic over time. The silicone in it sucks the oils right out of the material.

I recommend to only use Meguiars or Mother's stuff.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

BTW, those are very nice door panels.

You're right in that anything other than black or grey gets tossed. They could be off a 500 Mile car and still would not get more than $20 pers side.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
Sandy
Posts: 5965
Joined: Thu Aug 26, 2004 5:13 am
Location: Northern New Jersey GSP Exit 148
Contact:

Post by Sandy »

VERY VERY NICE !!
Sandy passed away in 2012. He will be forever missed.

1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.

http://public.fotki.com/ascmclaren/ascm ... _mclarens/
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

Mustang Marty (or Sandy or anyone else), do the asc Capri verts have the hatch door panels or the vert door panels with the higher carpet area? I haven't been paying attention.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
User avatar
Sandy
Posts: 5965
Joined: Thu Aug 26, 2004 5:13 am
Location: Northern New Jersey GSP Exit 148
Contact:

Post by Sandy »

I have not a clue. My guess would be the stock hatch door panels, since there was no convertible capri from dearborn.

EDIT: Just went & looked at Tom's Fotki Album of like 500 ascMcLaren Pics. They all used the lower carpet, stock Capri Hatchback Door Panel, with & without the Recaros.
Sandy passed away in 2012. He will be forever missed.

1990 Final Car prior to the 12 Silver Anny Editions
1990 Silver Pearl Anny Edition
1986 Coupe Full Pkg #109 of 114.

http://public.fotki.com/ascmclaren/ascm ... _mclarens/
User avatar
Foxfleet
Posts: 76
Joined: Wed Sep 01, 2004 6:39 pm
Contact:

Post by Foxfleet »

delete...I started another thread as to not take away from this thread on cleaning door panels.

http://www.ascmclarencoupe.com/phpBB/vi ... =2200#2200
Last edited by Foxfleet on Mon Mar 07, 2005 4:35 pm, edited 2 times in total.
86 Mercury Capri 5.0-201k stock
86 Mercury Capri 5.0-142k stock
86 asc/McLaren Capri Coupe-57k
85 asc/McLaren Capri 5.0 SC Vert-lots of miles
68 Cougar 5.0/C4 Tubbed, Caged, Project Pumpkin
55 Ford F 100-Full 5.0, 5 speed, wiring, S-trim
User avatar
mustang marty
Posts: 252
Joined: Sat Aug 28, 2004 11:13 pm
Location: Seattle
Contact:

Post by mustang marty »

negusm wrote:I'm not sure about STP but I think its basically the same stuff as amorall and armorall destroys vinyl and plastic over time. The silicone in it sucks the oils right out of the material.

I recommend to only use Meguiars or Mother's stuff.

-Mike
My mistake... it wasn't Son of a Gun. I've banned all of that ArmorAll type stuff from my garage! I forget what it is right now, but I will check later.
User avatar
negusm
Site Admin
Posts: 5105
Joined: Wed Aug 25, 2004 6:11 pm
Location: Charlotte, NC
Contact:

Post by negusm »

The guy that put the vinyl top on my old 67 Cougar (back in 91) told me to put nothing on it but lemon scented pledge. I used that stuff on my top and interior and never had a problem....plus the car smelled GREAT!

The next door neighbor to my parents has it and I saw the car last year when I was up in NY and it looked exactly like I left it all those years ago. Perfect original door panels, dashpad, etc. So I figure it probably didn't hurt it any....maybe that guy was right :shrug

I love the Meguiars stuff. It works great and does clean a bit too.

-Mike
1985 ascMcLaren Coupe - Midnight Blue
Under Restoration
Post Reply