1297
<<
Message Index
>>
1299 Number: 1298 From: "Sandy Block" <cigarsandy@c...> Date: Sun Sep 22, 2002 8:34 pm Subject: Re: more new pics
Body:
I do not doubt you, Eric....But I promise you that is NOT how they left asc !!
--- In ascmclaren@y..., ho660 <no_reply@y...> wrote: > Sandy, > > I've also seen a couple of 85 SC's with just a Brass production # > plate on the pass side. There was no plastic surround as on my 86, or > other 86's I've seen. I studied one of these 85 plates very closely > and it appeared to be original with the production number stamped > right into it. The car appeared to be untouched (but who knows). The > font was definitely different than what appeared on my 86 or any > other 86 and later ones I've seen with the black plastic surround and > printed production number/Design by plate. Possible the 85's (early > ones) had just the brass plate as delivered by ASC? > > Regards, > > Eric > > > > > > >
--- In ascmclaren@y..., "Sandy Block" <cigarsandy@c...> wrote: > > At some point, yours was removed (stolen) fell off....something. > You > > have the center section, but not the "frame" piece. I'll look & > try > > to direct you to a half decent photo to see..... > > > > > > > > > >
--- In ascmclaren@y..., "jdawg" <jdawg@e...> wrote: > > > were they supposed to be that way for every year? cause mine is > > > just a brass rectangle with like 3m foam tape holding it on. it > > has > > > been removed (by me) several times but it never had a plastic > > > frame. this is the way it came from the dealership. > > > jdawg > > > > > > > > > > > > > > >
--- In ascmclaren@y..., "Sandy Block" <cigarsandy@c...> wrote: > > > > They were all brass, but set into a plastic housing/frame that > > was > > > > black plastic, with a red-orange border (painted). The brass > > part > > > > has a clear (removeable) plastic film over it, just waiting to > be > > > > peeled off. > > > > > > > > > > > > > > > > > > > >
--- In ascmclaren@y..., "jdawg" <jdawg@e...> wrote: > > > > > i guess we would have to ask sandy about that one. any info > on > > > the > > > > > plaque styles or materials sandy? i believe mine is brass. > > > > > jdawg > > > > > > > > > > > > > > >