1298
<<
Message Index
>>
1300 Number: 1299 From: ascmcwhat85 Date: Sun Sep 22, 2002 11:23 pm Subject: Re: more new pics
Body:
Hey People, My '85 Vert had no plastic framing around it and from what I remember even in the brouchers I do not remember seeing it. After I got my ASC repainted I relocated my plate to the inside. Mainly do to fear of losing it or having it taken.
Thanks, Clay
--- In ascmclaren@y..., "Sandy Block" <cigarsandy@c...> wrote: > I do not doubt you, Eric....But I promise you that is NOT how they > left asc !! > > > > >
--- In ascmclaren@y..., ho660 <no_reply@y...> wrote: > > Sandy, > > > > I've also seen a couple of 85 SC's with just a Brass production # > > plate on the pass side. There was no plastic surround as on my 86, > or > > other 86's I've seen. I studied one of these 85 plates very closely > > and it appeared to be original with the production number stamped > > right into it. The car appeared to be untouched (but who knows). > The > > font was definitely different than what appeared on my 86 or any > > other 86 and later ones I've seen with the black plastic surround > and > > printed production number/Design by plate. Possible the 85's (early > > ones) had just the brass plate as delivered by ASC? > > > > Regards, > > > > Eric > > > > > > > > > > > > > >
--- In ascmclaren@y..., "Sandy Block" <cigarsandy@c...> wrote: > > > At some point, yours was removed (stolen) fell off....something. > > You > > > have the center section, but not the "frame" piece. I'll look & > > try > > > to direct you to a half decent photo to see..... > > > > > > > > > > > > > > >
--- In ascmclaren@y..., "jdawg" <jdawg@e...> wrote: > > > > were they supposed to be that way for every year? cause mine > is > > > > just a brass rectangle with like 3m foam tape holding it on. > it > > > has > > > > been removed (by me) several times but it never had a plastic > > > > frame. this is the way it came from the dealership. > > > > jdawg > > > > > > > > > > > > > > > > > > > >
--- In ascmclaren@y..., "Sandy Block" <cigarsandy@c...> wrote: > > > > > They were all brass, but set into a plastic housing/frame > that > > > was > > > > > black plastic, with a red-orange border (painted). The brass > > > part > > > > > has a clear (removeable) plastic film over it, just waiting > to > > be > > > > > peeled off. > > > > > > > > > > > > > > > > > > > > > > > > >
--- In ascmclaren@y..., "jdawg" <jdawg@e...> wrote: > > > > > > i guess we would have to ask sandy about that one. any > info > > on > > > > the > > > > > > plaque styles or materials sandy? i believe mine is brass. > > > > > > jdawg > > > > > > > > > > > > > > > > > >