1352    <<    Message Index    >>    1354
Number: 1353
From: "Tom S." <tkm654@c...>
Date: Tue Sep 24, 2002  10:44 am
Subject: Re: [ASC McLaren ] '85 Carbs....(I goofed!)

Body:
I goofed the part numbers!! :(

These are the correct ones. :)

1983----E3ZE-9510-BGA
1984----E4ZE-9510-YA
1985----E5ZE-9510-GA

The only differences are minor calibration changes.

Tom S.


--- In ascmclaren@y..., "Tom S." <tkm654@c...> wrote:
> 1983----E3ZE-9510-BGA
> 1984----E3ZE-9510-YA
> 1985----E3ZE-9510-GA
>
> All these carbs are Motorcraft manufactured by Holley. They are
all
> model # 4180-C, they all have a flow rating of 600CFM and are
derived
> from the 4150 and 4160 series Holley.
>
> For more info I highly recommend that everybody buy this book--"The
> official Ford Mustang 5.0 technical reference and performance
> handbook"
>
> Tom S.
>
>

--- In ascmclaren@y..., "negusm" <negusm@y...> wrote:
> > Yeah, I was kinda hoping that somebody knows the true part number
> of
> > the '85 carb. Not a big deal, but that part number seems to
elude
> > (annoy?) me for some reason.
> >
> > -Mike
> >
> >

--- In ascmclaren@y..., James Gibat-Thoroski
<jgibatthoroski@u...>
> > wrote:
> > >
> > > The car is the same, the state of tune is different. Going
from
> > 175HP in 84 to
> > > 210 in 85, the carb was tuned differently to accomodate those
> > extra 35HP. That
> > > probably explains the different part numbers.
> > >
> > >
> > >
> > >
> > > ----------
> > > 76 Capri GHIA / 77 Capri RSX
> > > http://www.mercurycapri.com .net .org
> > > Updated September 3rd, 2002
> > >
> > >
> > > ________________________________________________
> > > Get your own "800" number
> > > Voicemail, fax, email, and a lot more
> > > http://www.ureach.com/reg/tag
> > >
> > >
> > > ---- On Tue, 24 Sep 2002, negusm (negusm@y...) wrote:
> > >
> > > > It may have been the "same" but does it have the same part
> > number?
> > > > It appears that 84 carb part numbers started with E4 and 85
> carb
> > > > part numbers started with an E5.
> > > >
> > > > The carb that is on its way, supposedly has a part number
> > stamped on
> > > > it of:
> > > >
> > > > E5TEZB C7A 5
> > > >
> > > > This would not have been on an '84 carb. And if I could
decode
> > it
> > > > it probably says it is for a Ford application and not a
Mercury
> > one.
> > > >
> > > > -Mike
> > > >
> > > > > 84 and 85 had the same carb.
> > > > >

  Replies Name/Email Yahoo! ID Date Size
1357 Re: '85 Carbs....(I goofed!) negusm negusm Tue  9/24/2002   5 KB