2553    <<    Message Index    >>    2555
Number: 2554
From: "negusm" <negusm@y...>
Date: Wed May 7, 2003  9:13 am
Subject: Re: [ASC McLaren ] Can't keep Brent waiting! CHASSIS TYME !

Body:
Can you post those settings? For front and rear? I'd like to have
my car set back to those settings some day.

-Mike



--- In ascmclaren@yahoogroups.com, "Sandy Block" <cigarsandy@c...>
wrote:
> The incorrect spelling of the wheel manufacturer is MY fault. I
took
> a quick look and thought that I had it, when in fact, I did not.
> The remainder of what you guys are saying just isn't so, is what's
on
> the sheet. I will go back & look at it later & see if it really
says
> Front AND rear axle for the caster/cambur settings.
> The man who has the automatic car with Ford factory stereo, please
> send to me your VIN (Serial #) ~ I am pretty sure yours is a
> EuroCoupe. Most all EuroCoupes had the Ford factory stereo and
most
> were automatic transmission. It just sounds like it is. With VIN
I
> can verify it.
>
> S A N D Y
>
>
>
>
>

--- In ascmclaren@yahoogroups.com, John Gemelli <jgemelli@o...>
wrote:
> > Pinion angle can also be changed. This is often done for racing
> and when
> > ride height is changed.
> >
> > John
> > ----- Original Message -----
> > From: "Tom S." <tkm654@c...>
> > To: <ascmclaren@yahoogroups.com>
> > Sent: Wednesday, May 07, 2003 1:08 AM
> > Subject: Re: [ASC McLaren ] Can't keep Brent waiting! CHASSIS
TYME !
> >
> >
> > > The only changes possible in the rear is ride height. With a
solid
> > > rear axle camber is fixed and there is no such thing as
different
> > > caster settings.
> > >
> > > Tom S.
> > >
> > >

--- In ascmclaren@yahoogroups.com, "Sandy Block"
<cigarsandy@c...>
> > > wrote:
> > > > Strange, because I actually have the settings!!
> > > >
> > > >
> > > >
> > > >
> > > > -- In ascmclaren@yahoogroups.com, Tom G <speedracer815@y...>
> wrote:
> > > > > Sandy I have a couple of problems with this one:
> > > > >
> > > > > > * Modify Caster/Camber of vehicle, both front &
> > > > > > rear...
> > > > >
> > > > > Not possible in the rear. It's a stick axle and caster
> > > > > and camber are fixed.
> > > > >
> > > > > > * Wheels:- Imported from Capignolio from Italy...
> > > > >
> > > > > That's Campagnolo. They make some limited automotive
> > > > > wheels, but mainly make bicycle components. They are
> > > > > to racing bikes as Ferrari is to cars.
> > > > >
> > > > > Tom Gentry
> > > > > Life is too short for boring cars!
> > > > >
> > > > > __________________________________
> > > > > Do you Yahoo!?
> > > > > The New Yahoo! Search - Faster. Easier. Bingo.
> > > > > http://search.yahoo.com
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > >
> > >
> > >
> > >
> > >
>
> > >
> > >