Body:
"5.0 SC" is correct for a convertible but a Coupe or EuroCoupe centercaps should have the "ASC Mclaren" logo on them, but I could be wrong. I'm sure Sandy will chime in with the details. :)
Brent
----- Original Message ----- From: "jdawg" <jdawg@e...> To: <ascmclaren@yahoogroups.com> Sent: Wednesday, May 07, 2003 1:13 PM Subject: Re: [ASC McLaren ] Can't keep Brent waiting! CHASSIS TYME !> my factory wheels have the 5.0 SC you speak about, black with silver > print. again, mine is a rag, not a coupe. > jdawg > > >
--- In ascmclaren@yahoogroups.com, "Brent Abrams" <babrams@l...> > wrote: > > Sandy, > > > > I saw Cliff's car at Carlisle a few years ago, I doubt that it is a > > EuroCoupe because there are at least three things that I remember > it having > > that only a Coupe would have. > > * It has a numbered dash plaque > > * It has the correct gray piping in the seats > > * It has white wheels. > > Of course when you get the VIN from him, it will confirm it's true > identity. > > > > One thing I did notice about his wheels that puzzled me though. > > His wheels have the "SC" center caps in them instead of the "ASC > McLaren" > > ones and I found that kind of strange. > > > > Brent > > > > > > ----- Original Message ----- > > From: "Sandy Block" <cigarsandy@c...> > > To: <ascmclaren@yahoogroups.com> > > Sent: Wednesday, May 07, 2003 7:42 AM > > Subject: Re: [ASC McLaren ] Can't keep Brent waiting! CHASSIS > TYME ! > > > > > > > The incorrect spelling of the wheel manufacturer is MY fault. I > took > > > a quick look and thought that I had it, when in fact, I did not. > > > The remainder of what you guys are saying just isn't so, is > what's on > > > the sheet. I will go back & look at it later & see if it really > says > > > Front AND rear axle for the caster/cambur settings. > > > The man who has the automatic car with Ford factory stereo, > please > > > send to me your VIN (Serial #) ~ I am pretty sure yours is a > > > EuroCoupe. Most all EuroCoupes had the Ford factory stereo and > most > > > were automatic transmission. It just sounds like it is. With > VIN I > > > can verify it. > > > > > > S A N D Y > > > > > > > > > > > > > > >
--- In ascmclaren@yahoogroups.com, John Gemelli <jgemelli@o...> > wrote: > > > > Pinion angle can also be changed. This is often done for > racing > > > and when > > > > ride height is changed. > > > > > > > > John > > > > ----- Original Message ----- > > > > From: "Tom S." <tkm654@c...> > > > > To: <ascmclaren@yahoogroups.com> > > > > Sent: Wednesday, May 07, 2003 1:08 AM > > > > Subject: Re: [ASC McLaren ] Can't keep Brent waiting! CHASSIS > TYME ! > > > > > > > > > > > > > The only changes possible in the rear is ride height. With a > solid > > > > > rear axle camber is fixed and there is no such thing as > different > > > > > caster settings. > > > > > > > > > > Tom S. > > > > > > > > > >
--- In ascmclaren@yahoogroups.com, "Sandy Block" > <cigarsandy@c...> > > > > > wrote: > > > > > > Strange, because I actually have the settings!! > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > -- In ascmclaren@yahoogroups.com, Tom G > <speedracer815@y...> > > > wrote: > > > > > > > Sandy I have a couple of problems with this one: > > > > > > > > > > > > > > > * Modify Caster/Camber of vehicle, both front & > > > > > > > > rear... > > > > > > > > > > > > > > Not possible in the rear. It's a stick axle and caster > > > > > > > and camber are fixed. > > > > > > > > > > > > > > > * Wheels:- Imported from Capignolio from Italy... > > > > > > > > > > > > > > That's Campagnolo. They make some limited automotive > > > > > > > wheels, but mainly make bicycle components. They are > > > > > > > to racing bikes as Ferrari is to cars. > > > > > > > > > > > > > > Tom Gentry > > > > > > > Life is too short for boring cars! > > > > > > > > > > > > > > __________________________________ > > > > > > > Do you Yahoo!? > > > > > > > The New Yahoo! Search - Faster. Easier. Bingo. > > > > > > > http://search.yahoo.com > > > > > > > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > > > > > > > > > > > > > > > > > > > > > > > > > > > > To unsubscribe from this group, send an email to: > > > > > > > >