3974    <<    Message Index    >>    3976
Number: 3975
From: "Tom S."
Date: Tue Nov 18, 2003  4:59 pm
Subject: Re: [ASC McLaren ] Re: Popular Info for COUPE shocks

Body:
Re: [ASC McLaren ] Re: Popular Info for COUPE shocks

The SSP Mustang did not utilize the different upper control arm bushings until 1992.  Otherwise ALL suspension parts were the same as standard 5.0's.
 
Tom S.
'86 LX 5.0 Coupe
'89 SSP Mustang X-Oregon State Police
----- Original Message -----
From: Nelson
To: ascmclaren@yahoogroups.com
Sent: Tuesday, November 18, 2003 10:43 AM
Subject: Re: [ASC McLaren ] Re: Popular Info for COUPE shocks

Since asc/Mclaren seems to have used mostly off-the-shelf
Ford parts, I'd suspect that the harder bushings might be
the "police/taxi" spec upper control arm bushings in the
rear upper control arms.
 
Nelson
1990 Mustang LX 5.0
http://fiveoh.homestead.com
http://home.comcast.net/~lxfiveoh
----- Original Message -----
From: Tom G
To: ascmclaren@yahoogroups.com
Sent: Tuesday, November 18, 2003 11:28 AM
Subject: Re: [ASC McLaren ] Re: Popular Info for COUPE shocks

My question is: Does anyone know any specifics about
these bushings? Which bushings were replaced? By whom?
How much stiffer? Different material (ie, urethane)?

Tom Gentry
Life is too short to not know what I'm replacing.

.