2303    <<    Message Index    >>    2305
Number: 2304
From: "Tom S." <tkm654@c...>
Date: Thu Apr 10, 2003  2:45 am
Subject: Re: [ASC McLaren ] Sorry, to bring this up again....

Body:
My '85 coupe (607910) had a Kenwood with the two knobs.

Tom S.



--- In ascmclaren@yahoogroups.com, "negusm" <negusm@y...> wrote:
> I sent you an email on trying to see where my vin (ending with
> consecutive number 607872) falls in amongst your verts since I
have a
> coupe and no numbers were given for those.
>
> Please check your mail. Thanks for the response!
>
> -Mike
>
>
>

--- In ascmclaren@yahoogroups.com, John Gemelli <jgemelli@o...>
wrote:
> > The Kenwood is probably it. I have 3 85's. The coupe made mid
> year has the
> > Alpine, both converts have the Kenwood One is #236 (not sure
about
> the other
> > as it's still in storage.) If your # is before that it's most
> certainly the
> > Kenwood.
> >
> > They are digital radios. Not dial type radio's and have antenna
> boosters
> > attached. Sorry not sure about the amp though as mine have
never
> been out
> > of the car.
> >
> > Good luck with it!
> >
> > John
> > ----- Original Message -----
> > From: "negusm" <negusm@y...>
> > To: <ascmclaren@yahoogroups.com>
> > Sent: Wednesday, April 09, 2003 5:11 PM
> > Subject: [ASC McLaren ] Sorry, to bring this up again....
> >
> >
> > > This bugs me...
> > >
> > > So as you may or may not know...I sent the Alpine radio back
to
> Hank
> > > to get changed to the Kenwood since I thought my car was an
> early '85
> > > which it may not, the Alpine may be more correct for me...
> > >
> > > ...but anyways...I called Hank asking for the face plate (trim
> plate)
> > > for the radio. The Alpine he sent looked just like the asc
> > > Brochure...it has posts (dual shaft)...but it didn't come with
a
> face
> > > plate panel. The dash in my car which I believe is totally
> original
> > > is a DIN-style which was new for 1985 and went to 1986. It
has a
> > > wide opening and won't support a post style radio without at
least
> > > some trim plate or something.
> > >
> > > My question is, was there a DIN style radio that I should ask
Hank
> > > for, or was there a face plate used in the DIN opening for the
> dual
> > > shaft radio?
> > >
> > > -Mike
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > >
> > >
> > >
> > >
> > >
>
> > >
> > >

	Replies	Name/Email	Yahoo! ID	Date	Size
2305	Re: Sorry, to bring this up again....	Sandy Block	cigarsandy	Thu  4/10/2003	7 KB
2306	Re: Sorry, to bring this up again....	negusm	negusm	Thu  4/10/2003	7 KB
2307	85 Coupe Questions	Tom G	speedracer815	Thu  4/10/2003	3 KB
2309	Re: 85 Coupe Questions	John Gemelli	gemellifamily	Thu  4/10/2003	6 KB
2323	Re: 85 Coupe Questions	Tom G	speedracer815	Fri  4/11/2003	4 KB
2311	Re: 85 Coupe Questions	Sandy Block	cigarsandy	Thu  4/10/2003	3 KB
2322	Re: 85 Coupe Questions	Tom G	speedracer815	Fri  4/11/2003	4 KB
2312	Re: 85 Coupe Questions	Sandy Block	cigarsandy	Thu  4/10/2003	3 KB
2316	Re: 85 Coupe Questions	negusm	negusm	Thu  4/10/2003	8 KB